Відео

Can you tell me how my rear vents is blowing hot air but it's cold in the front? What will be the reason?

WAY TOO MUCH TORQUE! 67-72 LB/FT FOR THE CALIPER BOLTS; 25 LB/FT FOR THE SLIDING PINS. YOU'LL SNAP THE HEAD OFF YOUR WAY, THEN YOU'LL BE UP THE CREEK.

Easy Peasy.

💪🏾

Nice video bro im going to try to do thie later today but is it a 14mm socket or 40? Lol

Why would a antenna stop working?

Thank-you, that location is real frustrating and stupid ✌🏾

What dies an incomplete recall mean when I look this up at the official site for my car?

You might want to check under the hood left side under the wiper you can see the vent tube going to on the bottom that's where it is on my 2006 town & country base model.

Thanks for the video bro..u a lifesaver all them little details make a huge difference.. never thought i can do the wifes brakes in 30 min very grateful

Nice and clear instructions Hector, and congrats on reaching 20,000 SUBSCRIBERS!

I've done two of these racks already you don't need to take the battery in all that out😂 all you have to do is cut a 18 mm wrench in half and it will be short enough to get the lines off

Shoud have used them on the car...would like to see how high on the lowest setting....or if these are even a good choice for a car that is low to the ground.15 inches at the lowest is pretty high....I am curious how high the car would be....is it ridiculously high for a car?.

Easy Peasy.

Thank you , Brother. Always bringing good solid knowledge for those diy young men with kids to save that $$. Dunkin / TimHortons /$tarBucks toast to you.

You are great, awesome. later, after while, crocodile. I have to get a drill like yours, it saves a lot of time, I always use my hands too, so I know the threads are right.

This is the hardest car I have ever seen to change the spark plugs, I will have to follow you one step at a time when doing my tune up, You did a superb job, wonder how much a dealership would charge to do this? I bet too much. thank you so very much.

You should of removed that $200 dollar plus oxygen sensor.

The manifold or throttle body doesn’t have no gasket?

Thank you for both the videos on how to change your rear and front brakes. These videos been such a help. I’m ready to tackling my brakes 😁

When you change brake pads, you need to change the rotor to that rotor. Looks kind of bad so that means your brake pads are out quicker than they’re supposed to be. Because I had mine done. I didn’t do it myself because I didn’t have the proper jack, but the rotors need to be replaced because there are no good and there are warped. I got a feeling yours look warped as well.

Gracias amigo. Por tu ayuda. Thanks my friend for you help. Have a nivel Day

great explaining - very helpful

All I needed to know was where the horn fuse was. Couldn't find a single diagram anywhere that showed it. This was the clearest explanation on the internet. Thank you so much.

Waw! Thank you for your video!

Good looking out bro..

Perfect! Thank you!

I love that jack I've got the same one. You need the long one piece handle it's the replacement handle they sell it's like $30 an well worth having

🗣Honestly this is the best car maintenance video I have ever seen and believe me I am an auto mechanic from the 70’s. You got right to the point without a drawn out conversation.keep up the good work for me this one deserves a gold cup💯🏆❣️👍🏽

mine don't click only makes a running noise but not start something to do with selinoind???

Cool Hector!

Easy Peasy.

What’s the site to go in

Be a whole lot easier if you would turn the wheel right or left depending on which side you are working on

Thanks for the video freind. Keep it going my man.

Listen to that 6hp!!

So your wife

LOL, me and Silvia loved this video Hector! Now when can we see you take it for a ride? LOL!!

Thanks saved my life, was driving me nuts lol

In some states you don't have to wear a helmet

Replaced my spark plugs and coils still getting cylinder 1 misfire, gonna give this a try now. Thanks for the video.

You’re the man. Thank you

Thanks brotha

It Looks Like A Walkie Talkie.

DO NOT BUY THIS PRODUCT. IT DESTROYED THE CLEAR COAT ON THE PAINT, ALSO IT DOES NOT REMOVE THE SCRACHTES. TOTAL RIP OFF. Reply

No compression

God bless man. Made my day!

Very good instructions!

Thanks. I had no idea what I was doing at first. I am good to go now.

I just changed the oil in my 2008 Sonata V6 myself for the first time with the help of this video, so thank you!